Stealth 700 Vs 600 Headsets- Comparison

Stealth 700 adds 60mm drivers and dual USB transmitters, while Stealth 600 costs less with 50mm drivers and one transmitter.

If you’re shopping Turtle Beach’s Stealth line, the “700 vs 600” choice usually comes down to two things: how you swap between devices, and how much you care about sound headroom. Both models are wireless, both pair with a phone over Bluetooth, and both use a flip-to-mute boom mic with A.I.-based noise reduction. The real gap shows up once you start bouncing between a console, a PC, and your phone in the same night.

This comparison sticks to the current third-generation models and uses the maker’s published specs for the core numbers like driver size, Bluetooth version, and battery claims. You’ll also see setup steps, comfort notes, and a quick buying checklist so you can pick one and move on.

Stealth 700 Vs 600 Headsets Comparison With Real-World Picks

Want the quick match? Start here, then scroll for the deeper breakdown.

Pick Stealth 700 — You swap between two gaming devices a lot (Xbox, PlayStation, PC, Steam Deck) and want the dual-USB “CrossPlay” setup so you aren’t yanking a dongle back and forth. Turtle Beach lists two CrossPlay USB wireless transmitters in the box. Stealth 700 Gen 3 specs.
Pick Stealth 600 — You want the lower price point, you’re fine with one wireless transmitter, and you still want Bluetooth plus long battery claims. Turtle Beach lists 50mm drivers and one USB wireless transmitter in the box. Stealth 600 Gen 3 specs.
Pick Stealth 700 — You care about driver design and size. Stealth 700 Gen 3 uses 60mm “Eclipse” dual drivers, while Stealth 600 Gen 3 uses 50mm “Nanoclear” drivers.
Pick Stealth 600 — Your sessions are mostly one device at a time, and you’d prefer to keep the headset lighter on your head and your budget.

Core Specs Side By Side

Specs don’t tell the whole story, yet they’re the fastest way to see what you’re paying for. The table below uses the manufacturer’s published details for Gen 3.

Feature	Stealth 700 Gen 3	Stealth 600 Gen 3
Wireless + Bluetooth	2.4GHz + Bluetooth 5.2 (simultaneous)	2.4GHz + Bluetooth 5.2 (QuickSwitch)
Drivers	60mm Eclipse dual drivers	50mm Nanoclear drivers
Battery claim	Up to 80+ hours	80 hours
USB transmitters	Two (CrossPlay)	One
Mic	Flip-to-mute, uni-directional, A.I. noise reduction	Flip-to-mute, uni-directional, A.I. noise reduction
App / EQ	Swarm II app, 10-band EQ	Swarm II app, 10-band EQ

Two quick takeaways jump out. First, both headsets are trying to give you “console + phone” freedom with 2.4GHz wireless and Bluetooth 5.2. Second, the Stealth 700 is charging you for the CrossPlay dual-transmitter setup and the larger driver design.

Sound And Driver Tuning

Driver size isn’t a magic switch, yet it can change how a headset feels in games. The Stealth 700 Gen 3 uses 60mm Eclipse dual drivers. Turtle Beach describes this design as a woofer-and-tweeter style split inside each earcup, meant to separate lows and highs. The Stealth 600 Gen 3 uses 50mm Nanoclear drivers with the same 20Hz–20kHz frequency range listed on the spec sheet.

So what does that mean when you’re playing? With the 700, you can expect a little more space in the mix when a game is busy: gunfire, footsteps, voice chat, and ambient audio all at once. That extra headroom can also help at lower volume, since details don’t get buried as easily.

With the 600, the sound can still be clean and punchy, yet you may need a touch more EQ tweaking to get the same separation. That’s not a knock. Plenty of players prefer a simpler tuning that feels lively without needing a lot of app time.

Simple EQ Starting Points

If you use the Swarm II app, start with a small change and test it in a game you know well. Save one profile for shooters and one for story games so you’re not constantly adjusting.

Boost footstep range — Lift the upper mids a notch so steps and reloads stand out without turning the whole headset up.
Tame harsh treble — Drop the top end slightly if voice chat sounds sharp after an hour.
Add low punch — Raise the bass a bit for single-player games, then pull it back for competitive play.

Wireless, Bluetooth, And Switching Between Devices

This is where the two models feel the most different. Both list 2.4GHz wireless plus Bluetooth 5.2. The Stealth 700 Gen 3 is built around CrossPlay with two USB wireless transmitters in the box, and Turtle Beach calls out simultaneous wireless and Bluetooth audio. That combo is handy if you want game audio from your console or PC while Discord runs on your phone.

The Stealth 600 Gen 3 leans on a QuickSwitch button. The product page says a press swaps your audio and chat source between wireless and Bluetooth devices. That’s a clean approach if you only need one active connection at a time.

Which Switching Style Fits You

Choose CrossPlay — You move between two gaming setups daily and want the second dongle ready to go without moving gear.
Choose QuickSwitch — You swap between console and phone, yet you don’t need both playing at the same time.
Choose CrossPlay — Your phone calls or music run while you game, and you want separate volume controls for wireless and Bluetooth sources.

Mic, Chat Clarity, And Muting Habits

Both headsets use a flip-to-mute, uni-directional boom mic with A.I.-based noise reduction listed in the specs. In practice, the big win is the flip action. It’s fast, it’s obvious, and it saves you from the “am I muted?” panic when your team starts talking.

The mic experience still depends on where you play. A loud room, a hard desk surface, and a clicky mech board can all leak into chat. A.I. noise reduction can help, yet it won’t erase everything if the mic sits too far from your mouth.

Set mic distance — Keep the boom close to the corner of your mouth, not in front of it, so breath noise stays down.
Use sidetone lightly — Add a small amount so you don’t shout, then stop once you can hear yourself.
Flip mute every time — Build the habit so you never hot-mic a snack break.

Comfort, Clamp, And Build Feel

Comfort is personal, yet there are patterns. If you wear glasses, both product pages call out glasses-friendly memory foam cushions. The Stealth 700 Gen 3 also mentions a steel-reinforced design and a lay-flat build, while the Stealth 600 Gen 3 calls out an athletic weave fabric and a cushioned headband.

Here’s the trade: the Stealth 700 has more going on inside the cups and frame, so it can feel bulkier. The Stealth 600 often lands as the “put it on and forget it” pick for longer sessions, since there’s less heft to manage.

Fit Checks That Save A Return

Wear it for an hour — Hot spots show up late, not in the first five minutes.
Test glasses pressure — Slide the arms slightly up or down before you blame the earcups.
Try a hoodie — A hood changes clamp feel and mic placement, so it’s worth a quick test.

Controls, App Features, And Day-To-Day Use

Both Gen 3 models work with the Swarm II desktop and mobile app and list a 10-band EQ. They also list a mappable wheel and mode button. That’s good news if you want one dial for chat mix on PC, or a quick toggle for a favorite audio preset.

Before you remap anything, run a simple routine so you don’t get lost.

Learn the default layout — Play a match with stock controls so you know what you’re changing.
Map one control at a time — Change one wheel or button, then use it for a day.
Save named presets — Use labels like “Shooter Night” and “Story” so you can swap in seconds.

App Tweaks That Usually Pay Off

These are small, practical adjustments that tend to help most players without turning setup into a chore.

Lower mic monitoring — Too much sidetone can make your own voice feel loud and tiring.
Set a calmer EQ for chat — A flatter profile can make voices easier to follow over long sessions.
Keep one loud preset — Save a punchier setting for single-player nights when immersion is the goal.

Battery And Charging Habits

Both product pages claim about 80 hours of battery life with quick charging. Real battery time shifts with volume, mic use, and Bluetooth use, so treat the number as a ceiling. Still, it’s a lot of play time between charges.

If you’re trying to stretch battery life and keep charging simple, a few habits help.

Charge after long sessions — Plug in when you stop, not when the headset dies mid-game.
Use moderate volume — Loud volume drains faster and can fatigue your ears.
Keep the cable handy — A short USB-C cable near your console makes top-ups painless.

Setup Steps For Console, PC, And Phone

Most headset problems are setup hiccups: wrong output device, a muted mic in-game, or a Bluetooth pairing that never completed. Start with the basics, then move to the deeper checks.

Fast Setup Checklist

Plug in the transmitter — Use a front USB port first so it’s easy to see the connection state.
Set the audio device — In console settings or Windows sound settings, pick the headset as output and input.
Pair your phone — Use Bluetooth pairing from your phone’s settings, then test with a short call.
Open the app once — Update firmware early so you don’t troubleshoot old firmware later.

If Audio Drops Or Cuts Out

Move the transmitter — Use a short USB extension to pull it away from the console’s metal shell.
Swap USB ports — Some ports share bandwidth with external drives and can get noisy.
Restart the headset — Power it off fully, wait ten seconds, then turn it back on.
Clear Bluetooth pairings — Remove the headset from your phone, then pair again from scratch.

If Your Friends Can’t Hear You

Flip the mic down — It sounds silly, yet half of “dead mic” reports are a muted boom.
Pick the input device — Many games default to the controller mic or a webcam mic on PC.
Check in-game voice settings — Push-to-talk settings can block your mic on PC.
Lower background noise — Turn off desk fans or move the mic closer to your mouth.

Buying Checklist Before You Hit Purchase

If you only read one section before buying, make it this one. It’s the cleanest way to avoid ordering the wrong model and dealing with returns.

Count your devices — One main device points to Stealth 600; two daily devices points to Stealth 700’s dual-transmitter setup.
Decide on simultaneous audio — If you want game audio plus phone audio at once, Stealth 700 is built for it.
Set your sound priority — If you want extra headroom and a more layered mix, the 700’s 60mm dual-driver design is the bet.
Plan your comfort test — Give it an hour with your glasses, your chair, and your usual volume.
Install Swarm II early — Firmware updates and a saved EQ preset on day one prevent weird issues later.

For most people, the Stealth 600 Gen 3 is the smart buy when the budget matters and your setup is straightforward. The Stealth 700 Gen 3 makes sense when you swap devices often, want simultaneous wireless and Bluetooth audio, and like the idea of 60mm dual drivers for a bigger sound stage.